Have you ever wondered why your SanDisk 128GB flash drive only shows 32GB after you’ve created a Recovery Disk? Or perhaps it’s displaying a fake volume size fault, or a volume too large for FAT32. Either way, you’re not alone. This article will provide you with some helpful solutions. We’ll walk you through each of these common problems and find the best solution to fix them.

Fixing a fake size fault

You have a fake-size fault on your 128GB flash drive. You can fix this error by restoring the original file directory to its original size. The problem often happens when too many files are stored on the memory device, and the next file starts writing at the location of 0MB. Eventually, the file directory becomes corrupt and you will no longer be able to access the files.

First, you should format the drive. If it is a USB flash drive, then it is pre-formatted in the FAT32 file system. This file system is designed to work with a wide variety of devices. The problem with this file system is that you can only copy 4GB files at a time. To fix this error, you will need to convert the flash drive to NTFS.

The best way to fix the fake-size fault on a 128GB flash drive is to use a program to repair the memory. Several software programs are available to repair these memory chips. Some of them have a “hack” version that can ignore memory errors. You can use these tools to repair your fake-size fault. If you’re not sure what software to use, you can read FixFakeFlash.org FAQ to learn more about this issue.

Fixing a volume too big for FAT32 error

If you want to format a 128GB flash drive in FAT32 file system, there are a few things you must do first. You must format the partition first before proceeding to the next step. To do this, you need to format the disk partition and the file system. If you want to format your flash drive in FAT32, you must use a tool that helps format large storage devices, such as HDDs, SSDs, and USB drives.

Firstly, you need to make sure the volume is larger than 4GB, and you have to format it with the DOS command line. If the error still persists, you need to format the disk using Windows PowerShell. Once you’ve done that, it’s time to format the flash drive to fix the problem. Be aware that formatting will also erase your data.

If this solution doesn’t work, try formatting your flash drive using Windows PowerShell. This is a scripting language, and it’s not the quickest way to format a 128GB flash drive. This process can take a few hours. If you try formatting a 128GB flash drive this way, you’re likely to experience formatting failure. File Explorer and Diskpart are two common tools to format a 128GB flash drive in FAT32. You can also try Qiling Partition Master.

Fixing a missing volume fault

If you’ve got a PNY 128GB flash drive and it doesn’t recognize it, you’re not alone. This problem can be caused by several reasons, from incorrect formatting to a physical defect. To fix this issue, you should follow the steps outlined below. You should be able to use the entire capacity of your flash drive once again. But before you try this solution, make sure you have a back-up of your data first.

First, connect your PNY 128GB flash drive to your computer through the USB port. Click “Format” and select the FAT32 file system. In the Format Menu, edit the Partition Label and Cluster Size and hit “OK.” After formatting, your PNY 128GB flash drive should be empty and ready to store your files. Once the formatting is complete, you can use the flash drive to store your files.

If you’ve encountered this problem before, you need to be sure you have the right device. Windows doesn’t recognize encrypted devices, so it creates a folder on the drive in between the writing and verification stages. You’ll need to install the right software to fix the issue. If you’ve tried all of these things and still have the problem, try using a different USB interface.