If you can’t get the analog stick to move, it’s possible the joystick is broken. To fix this problem, remove the joystick from the PSP and use a spudger to pry it off. Using the spudger, push the analogue stick upwards until it stops. Then, rotate it clockwise twenty times and remove it. Next, push the homebar up to release the tab.

If you can’t get the jogstick to work properly, you can try to clean the buttons. You can try this by opening the PSP cover and gently cleaning the buttons with a dry rag. If that doesn’t fix the problem, you can also try calibrating the sticks. To calibrate the sticks, simply turn them clockwise 20 times. Be sure not to touch them during the calibration process.

If you can’t calibrate the analog stick, you can try resetting it by pressing the home button. If this doesn’t fix the problem, you can take it to Sony for repairs. They have many parts you can buy to replace the jogstick and clean it yourself. A few of these steps will cost a few dollars but will ensure you get the same performance as new. If you have any other questions, please feel free to contact us. You can also visit our support center. If you can’t find an answer to your question, we would be happy to assist you.

To calibrate the sticks, first try to open the PSP and remove the joystick. Then, take a cotton swab with rubbing alcohol and clean the area between the two. After cleaning, you can try the buttons again. Otherwise, you can visit Sony for a repair or replacement. You can also clean the analogue stick by following these simple steps. The first step is to remove the joystick and clean the connector.

If the jogstick doesn’t work after calibration, you can disable it in the Settings menu. Go to the “Analog” section and choose the appropriate setting. Afterward, tap the buttons again. When the button is calibrated, you should be able to play the game with the analog stick. However, if this doesn’t help, you can try a more simple solution.

The first step is to disable the jogstick. You can do this by going to the Settings menu and navigating to the Joystick settings. Once you have disabled the joystick, you need to test it again. You can also try to clean the buttons by using a cotton swab with rubbing alcohol. You can also take them apart and clean them using rubbing alcohol. In this way, you can fix your PSP by wiping them.

First, you need to disable the joystick. To do this, you should press the “Home” button and then press the “Settings” icon. You can also try to enable the joystick. This is the most common solution for a faulty analog stick. It will allow you to move the joystick again and will make the system work better. So, if the PSP has these problems, don’t hesitate to fix it!

If the PSP won’t charge, the problem could be caused by a bad power adapter. If the power adapter is faulty, you will need to buy a new one. If the green light turns on but the PSP shuts down, it’s bricked. In such a case, it’s time to replace the joystick. You can also try the other methods to fix the problem.

After you’ve done this, you can try cleaning the buttons. You can also try replacing the buttons if the problem persists. Besides cleaning the buttons, you can also calibrate your PSP analog stick by rotating the sticks clockwise 20 times. If this doesn’t work, you can contact Sony to have it repaired. If you’re not satisfied with the results, the first two solutions listed above should be sufficient.