If your PS4 controller isn’t working, it might be because your console is having trouble recognizing it. It may have been paired properly but you are having trouble pairing it. To fix this problem, restart your console and try again. If the problem persists, disconnect your controller from other devices and plug it in again. This should automatically pair the controller and start working again.
The controller may be defective and the problem could be in the charging port. If this is the case, you can attempt to reset it by inserting a toothpick or compressed air into the tiny hole on the back of the device and holding it down for a few seconds. After that, the controller should reboot and charge properly. If the problem persists, contact Sony support to fix the problem.
You can check your controller’s battery life by pressing the PS button on your controller. A quick glance at the Quick Menu will reveal the controller’s icon and the battery life. The PS button will flash for several seconds. The PlayStation 4 will automatically reconnect the controller if it’s connected. Otherwise, the PS4 will not recognize the controller. Then, press the power button again on the PS4 to power the controller.
The next step is to check the charging port on your PS4 controller. If the device is working fine, try using another USB cable or a micro-USB connector. Restarting the console will immediately identify your controller. If you’re able to do this, your PS4 controller should work. The next step is to try a different cord. If the USB cable or connector is broken, you can use a different one.
When your PlayStation 4 controller only works when plugged in, it’s time to check the charging port. If it’s blue, the problem is in the cable. It’s time to replace it with a new one. If you can’t find the charging port, try a different USB connection. Sometimes, the problem can be as simple as the charging port.
There are several possible causes for this problem. In some cases, it’s the charging port that’s the cause of the problem. For example, the USB port may be damaged or dirty and might not be compatible with your PS4 controller. If the charging port is clean, it will likely be able to work again. If the problem persists, it may be a defective USB connector.
Table of Contents
Why does my PS4 controller glow orange?
Indeed, Sony has engineered their controllers to emit a light signal that corresponds to use data. When the PS4 controller’s light bar turns orange, it means it is charging. As a result, your controller should be flashing orange as a result (or yellow).
What’s up with my PS4 controller’s white and orange flickering lights?
The orange light bar may be an intentional element in certain games. To get the controller to pair with your console, plug it straight into the console’s USB port, then turn it on. If it doesn’t work, it’s possible that your controller is faulty.
Why does my PS4 controller keep breaking?
The DualShock 4 has a much shorter battery life than either the Xbox One controller or the Nintendo Switch Pro controller (usually on the lower end of that spectrum).
What’s up with my white PS4?
During power outage, the console lights pulse white and eventually switch off. When the console is turned off, USB controllers cannot be charged, downloaded, or installed.
Without the controller, how can I connect my PS4 controller to my PS4?
A pin or paperclip may be used to poke a hole in the surface. Release pressure on the internal button after a few seconds of pressing it. Use a USB cable to connect your DualShock 4 controller to your PlayStation 4. Use the PlayStation button on your controller to start playing.
How long does it take a PS4 to wear out?
The average lifespan of a PS4 is at least five years. However, there are exceptions to every rule. You must take care of your PS4 on a regular basis if you want it to survive longer.
What gives with the PS4 controllers?
What is it about PlayStation controllers that makes them so terrible? Poorly designed ergonomics are a common problem. There are a number of drawbacks to using the DualShock 4 over the Xbox controller, including a light that drains the controller’s battery and a thumbstick arrangement that doesn’t seem natural. Even the triggers are lacking in quality.
When a PS4 controller is plugged in but won’t turn on, what can you do to repair it?
Pressing the reset button near the L2 button on the bottom will do the trick. It’s also possible to do a hard reset by turning off and then re-powering your PlayStation 4. Finally, connect the PS4 console’s USB connector (the controller’s USB cord) and power it on.
Why can’t I use my PS4 controller even if it’s plugged in?
Restart the DUALSHOCK 4 controller
In order to restart your controller, look for a little reset button located on its rear near the L2 shoulder button. To activate the button, insert a little tool into the minuscule opening. For 3-5 seconds, keep pressing the button. Use a USB cord to connect the controller to the PS4 and hit the PS button on the controller.
What do the different colours on my PlayStation 4 controller mean?
To designate a colour, users must press the PS button in a certain sequence. In order, the first controller connected is blue, the second is red, the third is green, and the fourth is pink,
Is it possible to change the PS4 controller battery?
No. The DualShock 4’s internal battery is not supposed to be replaced, unlike the ones found in Xbox controllers from Microsoft. Instead of continually replacing out batteries, Sony’s solution is to use a micro-USB cord to charge your controller on your console.
What does it mean when the PS4 controller’s LEDs are constantly flashing?
The flashing white light on your DualShock controller might be caused by two things: either the battery is failing or the device has disconnected from the PlayStation.
