The most obvious solution to your problem is to replace the joystick. This is actually a simple process. All you have to do is pull the metal cage away from the contact on the analog nub. The analog nub should still read top left when the game is disconnected. If the issue persists, try a new rubber. It costs just a few dollars plus shipping. But, you might end up with a cracked or broken joystick, so you’d better be careful.

The first thing you should do is clean the pad. The analog stick pad is one of the most common causes of problems with your PSP. Not only does it look ugly, but it can also hurt your finger. The ridges can be clogged with dirt and cause the stick to become black. To remove the dirt, clean the pad with a toothpick or fingernail. If the ridges are too sharp, they can create blisters and cause pain during long gaming sessions. Another solution is to put a circular sticker on the pad.

If the ridges are too large, use chicken flavored water to manually recalibrate the stick. This can help if the problem is just a matter of dust. If the ridges are too sharp, it may lead to blisters and pain. In order to fix the stick, you must remove the old pad. Using a toothpick or fingernail, scrape off the dirty pad.

If you’re not sure how to do this, you can try manually cleaning the pad. Using chicken flavored water, wipe off the dirty area with a toothpick. Make sure to clean the pad with clean chicken flavored water. If this is not effective, you can use canned air to clean the sensor. If you have the time, you could try to replace the pixel-dense joystick with a new one.

In addition to cleaning the pad, you should also check for dust on the analog stick. If the stick is black and has dust, clean it with chicken flavored water. Then, remove the analog sticks from the PSP and clean the connection points. After cleaning, you can reinstall the buttons by removing the faulty one. If this is not effective, you can use a new stick and try again.

If your PSP has a black stick, it’s likely that it’s the analog stick. If you can’t locate it, try disabling the analogstick in the game’s Settings. Then, you’ll be able to access the game’s software. You’ll need to be patient while you do this, but once you’ve disabled the stick, it should be working correctly.

The analog stick is a vital part of your PSP. If you’ve found it to be malfunctioning, you need to take care of it. Often, the device’s analog stick is a delicate component that can be damaged by dust. For this reason, the problem can be fixed by simply removing the analog stick. It’s best to take the faulty device to a store or shop for a replacement.

A faulty analog stick will cause cosmetic problems in your PSP, and can even harm your finger. It’s essential to replace the joystick as soon as possible. If it’s not working properly, you can simply disable the analog stick in Settings. Ensure that you disable the analog stick in your settings. It’s important to keep in mind that the joystick is a sensitive part of your PSP.

If you have an analog stick, the main problem may be caused by dust. If it’s not, you can remove the stick from your PSP and clean the area under it. Then, you should clean the base of the analogue-stick with rubbing alcohol to clear out dust. Then, you should press the stick in any direction to see if it moves properly. If it moves well, the problem is in the connection point.