If you want to use your PS4 or Xbox 360 controller in Steam, you’ll need to know how to open the controller overlay. Here are some tips to help you get started. Make sure to check out our other tutorials, too. These will help you open your Steam controller and test out your game. If you’re using a Wii U, you can even use it! Follow these steps and you’ll have no trouble using your PS4 or Xbox 360 controllers!

Using a PS4 controller

You can use a PS4 controller to play games on Steam. It can be wireless and can be configured to your liking. The best way to start using it is to power down your console and press the PS button on the controller. To pair the controller to Steam, you will need to hold down the PS button for seven to ten seconds. Then you can use it as a mouse and trackpad to navigate through the Steam platform.

To enable the Steam controller overlay, you must first enable Big Picture mode in Steam. Click on the controller icon in the top-right corner. This will open the controller configuration in Base Configurations. From here, you can toggle the controller for either Big Picture or Generic mode. Once you’ve selected which controller to use, you can turn it on or disable it depending on your preference. Once the controller is turned on, you will be presented with a menu where you can configure it.

Using a PS4 controller to open Steam controller overlay is also possible with the Xbox 360 wireless joystick. This controller features four buttons and can be configured as a mouse, joystick, or scroll wheel. If you prefer keyboard shortcuts, you can map the buttons on the controller to keyboard shortcuts or a specific key combination. However, if you prefer to use a PS4 controller, it’s best to use the bluetooth controller as it emulates the Xbox 360 controller.

Using a Xbox 360 controller

Using a Xbox 360 controller to open Steam’s interface is simple once you have the proper configuration. To do this, press the Guide button on the left analog stick. This will enable you to view and select installed games on your PC. You can also play games with the keyboard by configuring the controller settings. However, you should note that the control layouts for keyboard games are not the same as those for Xbox 360.

The Steam interface has several settings for configuring a Steam controller. First, you need to open Big Picture Mode by selecting the controller icon on the top right-hand corner. Then, click on the controller guide button, which will turn on the controller and open the Steam overlay menu. From there, you can configure your controller and launch games. Once you’ve done this, you’re ready to play Maplestory.

If you’re having trouble using your controller with Steam, you should disable the Steam controller overlay. It can cause issues with Elden Ring PC. Many players have reported similar problems. The editor of PC Gamer, Evan Lahti, encountered the same issue with his wired Xbox One controller. PC Gamer’s senior editor Tyler Wilde also had the same problem while playing Elden Ring.

Using a Wii U controller

Using a Wii U controller to launch games in Steam is possible with certain settings. In the Steam settings, you can choose “Big Picture Mode” and enable the controller guide feature. This will allow you to control Steam both with a gamepad and a keyboard. You can also enable the controller guide button in the Steam client’s settings. Afterwards, click the Controller Guide button to turn on your controller. This will open the Steam controller overlay menu, where you can customize the controller to use.

First, make sure you have installed “Configuration Support” on Steam. This will enable the games you are playing to recognize your controllers. Typically, you will only need one “Configuration Support” option. Choose the option that matches your controller’s name. Next, make sure you’ve assigned all buttons to the right controller buttons. If you’re not sure what to do next, take a screenshot of your controller’s button layout to identify the buttons for each game.

Once your Steam Big Picture mode is open, you can begin to map your controller. You can select custom controls or choose a template from others. Then, boot into Steam Big Picture mode, go to the library, and select Manage Game > Controller configuration. If you’re playing a game in Steam, you can also select the “Home” button in the game to summon the Steam overlay. Using a Wii U controller to open steam controller overlay