This error occurs when your graphics card resolution is higher than the monitor’s resolution. If you’ve recently purchased a new monitor and connected it to your old system, you might notice a red LED light in your computer mouse or keyboard. The problem is usually caused by the monitor not being able to recognize the signal from your graphics card. To fix this issue, follow these simple steps.
Table of Contents
No input signal
If you encounter a message like No input signal out of range, the problem is probably the resolution of your graphics card. This error can also occur if you try to connect a new monitor to an old system. To fix the problem, you should first check if the LED on your computer mouse or keyboard is working. If it is not, try updating the graphics driver. If the problem still persists, try to install the latest version.
Changing the resolution of your monitor might also fix the problem. In case the problem is related to your video card or monitor, you can try to change the resolution of both the monitor and video card. If you’re still facing the same problem, you can try to update the video card and monitor drivers. If you’re using Windows XP or Vista, you might need to change the resolution of your monitor and video card.
Graphics card resolution higher than monitor’s resolution
When connecting a new monitor, you may get the message “Input signal out of range” on your screen. The problem is usually caused by the resolution of your graphics card being higher than the resolution of your monitor. To fix this problem, lower the resolution on your monitor and restart your computer. If this doesn’t fix the problem, connect a different monitor or restart your computer.
If this does not work, you should reinstall the video card drivers. Then, you need to check the monitor condition. If you’re not sure, try connecting your monitor to another system to check whether the problem is related to the monitor. If the error is still occurring, try uninstalling the video card. However, if the problem still persists, you can reinstall the video card driver.
Another solution is to turn on Safe Mode. This is useful when you’ve installed a new video card. Windows will try to enter “Normal” mode when you switch off the Safe Mode. In order to change the display resolution, right-click on the Desktop and select Properties. On the Display Properties page, click the Advanced button. Click on the Monitor tab. Under the Monitor tab, choose the desired refresh rate. 60Hz is generally the lowest recommended rate for LCDs, while 60Hz is a better option for cathode-ray tubes.
Refresh rate change
Input signal out of range is an error that highlights a problem with the video signal. Often, this happens when you’re trying to connect a new monitor to a system that uses an old graphics card. There are a couple of ways to fix this problem. First, you should uninstall your monitor’s video driver. This may not solve your issue, but it’s the best place to start.
The problem is caused by your video card being set to a higher resolution than your monitor. The problem could also be caused by a computer that’s set to a lower resolution. In any case, you should run a PC Repair & Optimizer Tool (PCROT) to resolve the problem. This free utility will fix a variety of problems, including this error.
