If you are wondering why your Powerbeats 3 keeps blinking red and white while charging, you’re not alone. There are plenty of other reasons your headphones may be going through this process. You can force restart the device using the remote, reset it, drain its battery, or update its firmware. If all else fails, try forgetting it in the Bluetooth settings. If none of these solutions work, you may have a defective battery.
Table of Contents
Fixing a faulty battery on a Beats X
To fix a faulty battery in a Beats X headphone, first, remove the center cap. Then, unscrew four screws. Finally, unscrew the “R” tab and disconnect the battery from the mainboard. Once you have removed the battery, you can reassemble the Beats X. Be sure to watch a video guide to follow along.
If you’ve found the battery to be the problem, the first step is to replace the battery. Be sure to use the right tool for the job. A heat gun works well for this task. Place the heat source on the seam of the main housing near the power button. Be careful not to heat up the entire housing by holding the heat source in one spot, as this could damage the housing.
Resetting corrupted settings on a Powerbeats 3
If your Powerbeats Solo 3 headphones have lost their ability to connect to your mobile device, you can restore them by resetting the product’s settings. To perform a factory reset, you must connect your headphones to the charger first. Then, hold the button on the mute and volume buttons simultaneously. After that, disconnect them. Afterwards, try connecting them to your mobile device again.
If you don’t see the “reset” icon in the menu, you can do a hard reset. First, make sure the power button on your Powerbeats Solo 3 is pressed. This should bring up a menu with a list of the device’s settings. Press the power button and volume down buttons simultaneously. Then, wait until the device lights up. Then, plug it back into an electrical outlet and check if it’s charging.
Avoiding overcharging your phone while charging
While it is common to leave a phone plugged in while it is charging, you should always avoid overcharging it. This can damage the battery, which loses efficiency faster when overcharged. Moreover, fast chargers will also damage the battery. Keep in mind that your phone works at its peak efficiency when it is between 20% and 90% of its total capacity. Here are a few tips to avoid overcharging your Beats Solo 3 phone while charging:
Make sure that you keep your headphones in a warm place while charging. Never place the headphones too far from your phone, because they will burn through the battery much faster. Besides, lithium-ion batteries cannot work well in cold and hot temperatures, so it’s better to avoid placing them near extreme heat sources. If you’re unable to avoid overcharging your Beats Solo 3 phone while charging, there are some things you can do to prevent this problem.
Checking the battery life on a Powerbeats 2
If you’ve been wishing you could get more play time out of your Beats Pro headphones, you might want to check the battery life. Apple has a great app that lets you find out how many hours you have left in your headphones. But before you download it, you should know how to check the battery life on your Powerbeats Pro headphones. Follow these steps and you should be able to get the most out of your headphones in no time.
The first step to check the battery level on your Beats headphones is to charge them. You can charge them using the included micro USB cable. When you plug the headphones into the charging case, you’ll notice a small, circular LED, called Fuel Gauge. If the battery is less than 40%, simply reset your headphones. This way, you’ll be able to listen to your music longer without having to worry about losing them.
Resetting a faulty battery on a Powerbeats 2
If you’ve noticed that the battery on your Powerbeats 2 is running out, you may need to reset it. To do this, open the Bluetooth settings on your device and select Forget this device. Once the device has been in this mode for at least 15 minutes, tap the power button to reset it. The device should now be ready to charge. However, you may need to reconnect it to the charger.
The most common cause of Powerbeats not turning on is a dead battery. Basically, a dead battery simply dries out and stops charging. You can easily solve this by replacing the battery or trying another pair of Powerbeats. If the charging issue persists, you can contact Apple support for assistance. If you don’t have an Apple Care membership, you can try contacting a technical support service for assistance.
